Crow Runner Link Manual de usuario descargar pdf (Pagina 13)

RUNNER LINK Gateway Configuring the Runner Link

On the PC keyboard, press the [Tab] key, or click the Subnet Mask field

(underneath the IP address).

A value of 255.255.255.0 is inserted automatically.

10. Click the

button twice and close the open screens.

Changing to the Authorized PC IP Address

This section requires that you have already installed the Configuration

software. See Installing the Installer Configuration Software on page 5.

The Auth

orized Address is the name given to the IP address of your

computer that you use for configuring the alarm systems. It is a static address

of your choosing and makes maintaining the equipment you have installed

much easier.

1. Ensure that the PC you are using to change the IP address has been set to

192.168.0.5 and a Subnet Mask of 255.255.255.0.

2. Double-click the Configurator

icon.

The Pconfig screen opens.

NOTE

For security concerns the screen and CONFIG button are disabled after

approximately 45 seconds. To continue, close the screen and open the

program again.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Sin comentarios

Crow Runner Link Manual de usuario Pagina 13